Install The External Roll Holder (Optional) - Brother TD-4650TNWB User Manual

3.2.2 Install the External Roll Holder (Optional)

1. Tighten the screws on the metal
fittings of the extended plate.
2. Attach the extended plate to the
bottom of the printer.
3. Insert a 3" (76.2 mm) Label Spindle
into a paper roll. Then, install it on
the External Roll Holder.
Note
Make sure that the label print side
is facing up.
4. Feed the media through the feed
slot in the back of the printer.
3" (76.2 mm)
Label Spindle
14