Brother TD-4650TNWB User Manual page 21

6. Close the Roll Compartment
Cover.
7. Use the Brother Printer Management Tool (BPM) to set the printer for Cutter Mode.
a. Start the BPM.
b. Click the Printer Configuration button.
c. Click the FBPL tab.
d. Click the CUTTER option from the Post-Print Action drop-down list.
e. Click Set.
f. Press the Feed/Pause button to test.
Note
Calibrate the Gap/Black Mark Sensor every time you change the installed media.

For more information about sensor calibration, see section
Media Sensor using the
Printer settings can also be changed using the LCD.

BPM.
17
7.2 Auto-Calibrating the