Brother TD-4650TNWB User Manual page 16

4. Slide the Media Guide Tips to the correct position.
Media Guide Tips
Note
For black mark media or media with notches or holes used to indicate the label length,

the Black Mark sensor is moveable. Slide the Media Guide Tips to the correct position.
For RFID models, slide the green RFID Antenna Slide to the correct position.

5. Place the paper, printing side face up, through the media sensor and place the first label's
leading edge onto the Platen Roller. Adjust the green Media Guide Tips to fit the label width.
6. Press down on both sides of the Roll
Compartment Cover to close it gently.
7. Use the LCD menu or the Brother
Printer Management Tool (BPM) to
set the media sensor type and
calibrate the selected sensor.
Note
For more information about sensor
calibration, see section
7.2. Auto-Calibrating the Media
Sensor using the BPM.
12
Black Mark
Sensor
RFID Antenna Slide
(TD-4650TNWBR and
TD-4750TNWBR)