Brother TD-4650TNWB User Manual page 61

d. Select the Sensor
e. Select Auto Calibration, select the media type, and then select the
Note
For more information, see section
Using the BPM:

a. Load the RFID media into the printer.
b. (Thermal transfer only) Load the ribbon into the printer.
c. Connect the USB cable between the computer and the printer.
d. Start the BPM.
e. Select the printer in the list, and then click the Printer Function button.
f. Click Calibrate.
g. Click Printer Configuration and make sure the paper width and height in the FBPL
tab are set correctly.
Using the AUTODETECT command:

Note
For more information, see the FBPL Command Reference Manual on your model's Manuals
page at support.brother.com.
2. Check that the RFID antenna is set at the center of the RFID chip or the antenna loop on
the tag. For more information, see section
.
6.4 Sensor Settings.
8.2.1 Select the Antenna
57
icon.
Position.