Brother TD-4650TNWB User Manual page 40

Setting
Speed
Set up the print speed.
Adjust the print darkness/lightness. Settings range from 0 to 15. You may
Density
need to adjust the print density based on the media.
Specify print direction.
Direction
Set the print mode.
Print Mode
Fine-tune the media stop location. Settings range from -999 dots to
Offset
999 dots.
Shift X
Fine-tune the print position. Settings range from -999 dots to 999 dots.
Shift Y
Reference X
Set the origin of the printer coordinate system horizontally and vertically.
Settings range from 0 dots to 999 dots.
Reference Y
Code Page Set the international character set code page.
Country Set the country code. Settings range from 1 to 358.
Note
If printing from the downloaded software/driver, the software/driver commands will overwrite
the settings set from the LCD.
DIRECTION 0
Print Mode Description
None The top of the next label is aligned with the Print Head
burn line (Tear Off Mode).
Batch Mode When the image is printed, the Gap/Black Mark is fed
through the tear plate for tear away.
Peeler Mode Enables label Peeler Mode.
Cutter Mode Enables label Cutter Mode.
Cutter Batch Cuts the label once at the end of the printing job.
Description
DIRECTION 1
36