Brother TD-4650TNWB User Manual page 53

Item
Tag PC
Write EPC
with 1s
Write EPC
with 2s
These settings are generally read-only and used to collect and report
statistics on how the RFID system is reporting on print jobs sent to the printer.
Tag Write
Count
Tag Failed
Count
Tag Read
Count
Statistics
Clear Tag
Stat
RFID
Reader
F/W
RFID
Reader
Hd/W
Description
Displays the last PC (Protocol Control) field read from an
RFID tag. If no tag is in range of the internal RFID coupler,
"Unknown" appears on the LCD.
Writes all ones to the tag in range of the internal RFID
coupler. It is primarily intended for development verification
by checking that the system is working.
Note
This menu item does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler to
receive an accurate writing.
Writes all twos to the tag in range of the internal RFID
coupler. It is primarily intended for development verification
by checking that the system is working.
Note
This menu item does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler to
receive an accurate writing.
Displays the number of tags attempted to be written since
the last Clear Tag Stat operation has been initiated.
Displays the number of failed RFID tags since the last Clear
Tag Stat operation has been initiated.
Displays the number of tags read since the last Clear Tag
Stat operation.
Clears the Count menu items in this submenu.
Displays the RFID firmware version installed in the encoder.
(Available for TD-4650TNWBR and TD-4750TNWBR)
Displays the RFID hardware version installed in the encoder.
(Available for TD-4650TNWBR and TD-4750TNWBR)
49