Removing Protection Sheet; Setting The Dk Roll - Brother QL-570N Setup & Operation Manual

4 Removing Protection Sheet

Press the ON/OFF button ( ) to turn on the
Brother QL-570/580N on. Then, press the FEED
button for more than one second to remove the
protection sheet.

5 Setting the DK Roll

1
Press and hold the ON/OFF button to turn
the QL-570/580N off. Hold the DK Roll
compartment cover at the front of the Brother
QL-570/580N and firmly lift up to open the
cover.
2
Put the spool into the spool guides in the DK
Roll compartment.
Make sure that the spool arms are inserted firmly in
•
the spool guides on the left and right.
Insert the spool with the DK Roll located on the right
•
hand side of the Brother QL-570/580N.
Protection sheet
9
STEP
1
STEP
2
STEP
3
STEP
4