Brother TD-4650TNWB User Manual page 51

Item
These settings are used to configure the system when custom RFID tags are
required.
USR Size
USR
Address
TID Size
RFID Chip
Param
Tag
Length
EPC
Address
Block Size Specifies the maximum number of bytes written to the USR
Description
Specifies the USR block bytes size within the RFID tag
memory. Normally, this value is set automatically by the
RFID calibration process and should not be changed.
Minimum 0 (Default)
Maximum 256
Note
This value is hidden if Higgs 3 tags are detected, and the
Higgs 3 USR Len menu is shown instead.
Specifies the starting location of the USR block within the
RFID tag memory. Normally, this value is set automatically
by the RFID calibration process and should not be changed.
Minimum 0 (Default)
Maximum 32
Indicates the size of the memory block within the RFID tag
memory that contains the Tag ID. Normally, this value is set
automatically by the RFID calibration process and should
not be changed.
Minimum 0
Maximum 12
Default 8
Specifies the EPC block bytes size within the RFID tag
memory. This value is set automatically by the RFID
calibration process and should not be changed.
Minimum 8
Maximum 64
Default 12
Note
This value is hidden if Higgs 3 tags are detected, and the
Higgs 3 EPC Len menu is shown instead.
Specifies the starting location of the EPC block within the
RFID tag memory. Normally, this value is set automatically
by the RFID calibration process and should not be changed.
Minimum 0 (Default)
Maximum 32
block within the RFID tag memory at one time. Normally,
this value is set automatically by the RFID calibration
process and should not be changed.
Minimum 0
Maximum 32
Default 8
47