Minimum Clearances; Environmental Requirements; Heat Output - Stratasys Fortus 360mc Site Preparation Manual

MINIMUM CLEARANCES

Side Clearance
Rear Clearance
Front Clearance
Overhead Clearance

ENVIRONMENTAL REQUIREMENTS

• The 360mc and 400mc system are for indoor use only.
• Maximum temperature of operating environment: 85°F (29°C)
• Maximum dew point: 78°F (25°C)

HEAT OUTPUT

Heat dissipation of the system occurs mostly through the top of the machine. Heat output is material dependent
due to the various temperatures maintained in the build chamber.
Material Type
ABS
PC
PPSF
Minimum 30 inches (76.29 cm) on each side
Minimum 12 inches (30.28 cm)
Minimum 36 inches (91.44 cm)
Minimum 28 inches (71.12 cm)
Figure 1: Minimum Clearances
28 inches (71.12 cm) minimum for overhead clearance
30 inches
(76.29 cm)
Heat Output
9,600 BTU/hr
12,000 BTU/hr
20,000 BTU/hr
12 inches
(30.28 cm)
Rear
Front
36 inches
(91.44 cm)
3
30 inches
(76.29 cm)