Lan Requirements - Stratasys Fortus 360mc Site Preparation Manual

LAN REQUIREMENTS

A LAN connection is required for communication and file transfer functions.
The LAN connection is a 100 base T, Ethernet protocol, RJ45 connector. One 25-ft. CAT5, 10/
•
100 base T cable is supplied with the system, located in the Startup Kit.
• The 360mc/400mc will function in either DHCP or Static IP configurations.
Note: Systems configured with a network option of UPnP=ON will occasionally
broadcast a unique system identifier across the network for use by the Insight
FDM Control Center software application.
Refer to Insight user information for workstation requirements.
Figure 4: Main power connection block diagram
8