Kalor Paola 13 User Manual page 14

Insert air stoves
Table of Contents

Advertisement

8.0 Failure on electrical devices
Mancata accensione
If the flame does not light up during the switching on or if the smokes temperature does not reach a suitable value in the
foreseen time gap, the insert switches off and you will read the words
on the display. Press the key "On/Off" to reset the alarm. Wait until the cooling phase is completed, clean the brazier and
start a new light-up.
Switching off while working
The insert suddenly switches off while working (for example because it has run out of pellets in the tank or because the
motor reducer for pellets loading got broken). The insert continues working until the pellets left in the brazier ends. You will
then read the words
"no pelle
Wait until the cooling phase is completed. Clean the brazier and start a new light-up.
These alarms remind you that the brazier must be cleaned and installed correctly before switching
on the insert.
There is no power supply
In the event of a power drop longer than one minute, the insert can exhaust some smoke in the room: this causes no
risks. As soon as you have the power supply again, the insert will have the words
completing the cooling phase, the insert will start up again automatically according to the previous settings.o precedente
all'assenza di elettricità.
Do not attempt to start the insert before the required time or it may get blocked. If
this occurs, switch off the switch on the back of the pellet insert insert for 1 minute,
set it on again and wait 10 minutes before starting the insert again.
The power socket where the insert is connected should be fitted with "earth
connection complying with regulations in force." The Manufacturer shall not be held
responsible for damage to things or people resulting from negligent installation.
Pict. 11: back
1. Fuse F4AL250V
2. Electrical feed cable
3. Lighting button
4. Thermostat reset button
5. Environmental probe
12
t"on the display and the insert switches off. Press the key "On/Off" to reset the alarm.
"N O LIG HT I
N".
"BLA C K OU T
1
2
3
4
5
" on the display. After

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chiara 15

Table of Contents