Kalor Paola 13 User Manual page 5

!
2.3 Suggestions
• Do not continuously turn the insert on and off as this could provoke sparks that could shorten the life of the electrical
components;
• Do not touch the insert with wet hands: the insert has electrical components that could produce sparks if handled
incorrectly. Only authorized technicians can resolve possible problems;
• Do not remove any screws from the fire chamber without first lubricating them well.
• Never open the glass door of the pellet insert while the insert is in operation;
• Be sure that the brazier basket is positioned correctly.
3.0 Pellets' loading in the pellet tank (Patent pending)
You can load the pellet in the pellet tank using the tray on the upper part of the insert. You can load the pellet in two ways:
• Remove the tray (Pict. 3); lift the supplied cab apron (shovel )(Pict. 4) so that you have a chute allowing the pellet to slide
into the tank (Pict. 5) . Load now the pellet (Pict. 6).
Pict. 3
Once you have loaded the pellets, lift the tray so that all the pellets go to the pellet tank (fig. 7). Close the pellets
tray (fig. 8).
Pict. 6
Please remember that the first lighting must be performed by
our certified Authorized Assistance Centre (Law 37/2008) that
verifies the installation and completes the guarantee.
During the first lighting the environment should be well ven-
tilated since during the first hours of operation unpleasant
odours could develop due to the physical stabilizing of the paint
and from the grease in the tubyère wrapping.
Pict. 4
Pict. 7
Pict. 5
Pict. 8
3