Filter Configuration Menu - Proxim RangeLAN 802 8520 User Manual

Subnet Mask indicates the mask that will be used to determine what network the
RangeLAN802 Access Point is on. This parameter will not change until the Access
Point is reset.
If a packet generated by the Access Point is destined for an IP host or node belonging to
a different IP subnet, the RangeLAN802 Access Point will send this IP packet to the
Default Gateway (usually a router) so that the packet can be routed to the proper desti-
nation. This parameter will not change until the Access Point is reset.
You can enable or disable the RangeLAN802 Access Point's ability to request its IP
address from a BOOTP server at boot time, and you can supply the IP address of that
server.
You can enable or disable the ability to open a telnet session to the RangeLAN802
Access Point and set a password to control telnet access.
You can enable or disable the ability to manage the RangeLAN802 Access Point via a
Web browser, and set a user name and password to control the Web browser access.

Filter Configuration Menu

The filter configuration allows you to customize the type of traffic which is forwarded
from the Ethernet network to the RangeLAN802 network. None of these filters affect
traffic flowing from the wireless clients to the wired backbone.
22