Table of Contents
Advertisement
You may configure and monitor the RangeLAN802 Access Point using a Web browser.
Supported Web Browsers
Netscape Navigator 3.01 or above for Win95/WinNT
Netscape Navigator 3.01 or above for Macintosh
Netscape Navigator 3.01 or above for SUN
Microsoft Internet Explorer 3.01 or above for Win95/WinNT
Establishing a Connection
Note:
The RangeLAN802 Access Point is manufactured without a default IP
address. In order to manage the RangeLAN802 Access Point with a Web
browser, you must first assign it a valid IP address for your network using null
modem cable configuration or a BOOTP server.
Start a supported Web browser on a computer that is connected to the network either via
a wired or wireless connection. Highlight and replace the existing URL path with the IP
address of the RangeLAN802 Access Point. For example, the starting URL may be
similar to "http://www.proxim.com." Highlight and replace the "www.proxim.com"
with the IP address of the RangeLAN802 Access Point. A final result would appear
similar in form to "http://100.25.200.1."
The browser will display the Proxim screen for the RangeLAN802 Access Point Web
management. A password may be required at this point if the RangeLAN802 Access
Point has had a Browser User Name and Browser Password set. After 5 minutes or
more the user is re-prompted for the password.
10. Web Browser Management
41
Advertisement
Table of Contents
