Led Indicators - Proxim RangeLAN 802 8520 User Manual

LED Indicators

There are three LEDs on the front of the RangeLAN802 Access Point, as shown in
Figure 12:
The cornermost LED, called the Status LED, changes from yellow to green to
indicate it is forwarding packets and functional. It changes from yellow to red if
there is a hardware problem with the unit. If this LED does turn red, contact
Proxim Technical Support. In addition, the LED will blink yellow if the Access
Point has switched to the Error ESSID because the 10BaseT Link Monitor is
enabled and cannot detect a 10BaseT Ethernet connection.
The center yellow LED, called the Radio LED, flashes when the Access Point
transmits wirelessly.
The third green LED, called the Backbone LED, flashes when the Access Point
transmits over the Ethernet.
The following table illustrates the state of the LEDs during power-up:
Figure 12
Front Panel LEDs
60
Status LED
Radio LED
Backbone LED