Christie D Series Service Manual page 50

In error state
The Status Monitor displays a warning of an error with larger letters. Resolve
the errors referring to the table of the sections "Related messages" and "Re-
garding the indicator lamps" when the warning is displayed.
Warnings;
AIR (AIR FLOW): The internal temperature is rising.
Refer to the description of the message, "CHECK THE AIR FLOW" in the table.
COLD: The interior portion may have become over cooled.
Refer to the LAMP and TEMP
FILTR
Refer to the LAMP and TEMP
SHUTR: Shutter Error
SHIFT: Lens Shift Error
Errors;
COVER
Refer to the LAMP
FAN: The cooling fan is not operating.
Refer to the TEMP
LAMP: The lamp does not light.
Refer to the LAMP indicator lighting in the table.
TEMP: The projector's interior becomes over heated.
Refer to the TEMP indicator lighting in the table.
ACBLK: Refer to the LAMP indicator lighting in the table.
OTHER: Errors other than the above.
NOTE:
at the same time.
Displaying the log
The present setup information and the error history can be displayed on the Status Monitor with
button operation.
When the projector is in a normal condition, or displays one of the warnings of AIR FLOW, COLD
or FILTER errors, press the FUNCTION button on the control panel, press the ENTER button
on the remote control for three seconds or press one of the MY BUTTON buttons if assigned as
buttons to switch display as below.
First display
LWU720i/LHD720i/LWU620i Service Manual
LWU720i / LHD720i / LWU620i
Usage time
information
C O V E R
example
FUNCTION
button
ENTER
button
49