Christie D Series Service Manual page 80

_______________________________________________________________________
assembling. Pay attention not to damage the wires or any other fragile parts of the projector.
FRONT COVER (FRONT COVER ASS'Y) / LENS (LENS ASS'Y)
impact. Use an air duster (dust blower) when cleaning them to avoid rust and dust.
Disassembling
1. Return the lens shift to the center position
(1) Press the LENS SHIFT button. The LENS
SHIFT dialog will appear.
(2) Press the ENTER or INPUT button while
the dialog is displayed to execute the
CENTERING feature, which adjusts the lens
to the center.
(3)
NOTE:
standby mode by pressing the FUNCTION and
LENS SHIFT buttons on the control panel for 3
seconds at the same time.
2. Turn off the projector
Turn off and unplug the projector, and allow the
3. Remove the front cover
Slide the front cover (the upper part) upward while
pressing the front cover from the underside and
remove the front cover from the projector.
Then, slide the front cover (the lower part) downward
while pressing the front cover from the upperside
and remove the front cover from the projector.
4. Remove the lens
to the lowest position and remove the lens from
the projector. You can move the lever while the
upper plate touches lower one.
NOTE:
Insert the lens hole cover to prevent any
substance getting into the lens installation area. Remove the lens unit and attach the lens hole
cover when moving the projector.
LWU720i/LHD720i/LWU620i Service Manual
LWU720i / LHD720i / LWU620i
CAUTION
CAUTION
Front cover (upper part)
Front cover (lower part)
79