Christie D Series Service Manual page 41

6-13 Regarding the indicator lamps
The indicators are described as below.
Lit
Steady light
Status Monitor
Current
Log
Status
1
COVER COVER
ERR
2
FAN*
FAN ERR *
(continued on next page)
LWU720i/LHD720i/LWU620i Service Manual
LWU720i / LHD720i / LWU620i
Off
Indicator Status
Red
Red Red
Red Red
Description
The projector is in a standby state.
The projector is warming up.
Wait for the projector to warm up.
The projector is in an on state.
Ordinary operations may be performed.
The projector is cooling down.
Wait for the projector to cool down.
The projector is cooling down. A certain error
has been detected.
Wait until POWER
then perform the proper measure using the item
descriptions below.
Turn the power off, and allow the projector to cool
down at least 45 minutes. After the projector has
state of the lamp cover. After performing any
needed maintenance, turn the power on again.
The cooling fan is not operating.
Turn the power off, and allow the projector to cool
down at least 20 minutes. After the projector has
matter has become caught in the fan, and so on
and then turn the power on again.
40