Assembling
1) Set AC INLET to the bottom case in the direction as
the rib for sure. Do not pinch the harness.
POWER UNIT ASSY straight.
3) Insert temperature sensor (TSW).
4)
NOTE:
[ LWU620i ]
[ LWU720i / LHD720i ]
narrow
5) Tighten 11 screws.
6) Insert lamp and tighten 3 screws.
7) Close lamp door and tighten 1 screw.
Wiring
Refer to page 64 and 65 for wiring.
LWU720i/LHD720i/LWU620i Service Manual
LWU720i / LHD720i / LWU620i
Pay attention to the direction
wide
Pay attention to the direction
wide
of the connector.
narrow
narrow
of the connector.
wide
narrow
wide
93