Christie D Series Service Manual page 104

LAMP FAN 1 (DC FAN CY6023RPWM-G4L252)
Disassembling
1) Release harness from LMP INTAKE DUCT.
2) Remove 2 screws to remove LAMP FAN 1.
REMC-Front PCB (PWB Assy FRONT-RC) and LED PWB
Disassembling
1) Pull 2 tabs to remove LED PCB and
disconnect the connector.
2) Disconnect the connector from REM REMC-
Front PCB and pull out the PCB upward.
CNRCF needs to go
through this duct.
FRONT IR PWB LED PWB
CNRCF
CNLED
CNRCF needs to go
through this hole.
CNRCF needs to go
through this rib.
LWU720i/LHD720i/LWU620i Service Manual
LWU720i / LHD720i / LWU620i
Assembling
To reinstall, perform disassembling process in
reverse.
Refer to page 69 for wiring.
Assembling
1) Insert REM FRONT PCB to the slit to
connect.
2) After connecting the cable to LED PCB, slide
Refer to page 62 for wiring.
Top View
FRONT IR PWB needs to
Confirm all 3 tabs
be inserted to the bottom.
are firmly fixed.
Front View
Wiring
Wiring
Paste cushion
not onto LED.
103