Christie D Series Service Manual page 46

ANALOG EDID
ON : Enables EDID of COMPUTER IN
OFF : Disables EDID of COMPUTER IN
BASIC FREQ.
Switches the basic vertical frequency for the output image of this projector.
50Hz
SERIAL # CLEAR
the serial # again once you do this operation. Do not execute this item in any cases except when
NETWORK RESET
SOFT RESET
When this is executed, all of the user data is initialized. Never use it if not required.
6-15 RUN TIME window
The product operating time display method (accumulated lamp hours display method)
1. Open the ADVANCED MENU and select SETUP - LAMP & FILTER - LAMP HOURS, and then
press the , ENTER or RESET button to display the LAMP HOURS reset box.
2. Press the RESET button once, then press GEOMETRY button of the remote control for 3 sec-
onds or more to display the screen shown below. The menu will close after 55 seconds if there
are no further operations.
3. Use to select the usage status number. (The usage status is as shown below.)
RUN TIME window
LWU720i/LHD720i/LWU620i Service Manual
LWU720i / LHD720i / LWU620i
60Hz (NTSC region)
0 ..... Total usage status
1 ..... Current usage status
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
45