Christie D Series Service Manual page 29

6-2 Articles necessary to your maintenance and repair works
In this projector, adhesive tapes and cable ties are used for the purpose of fastening and tying
the wires. Once you remove the tapes or unfasten the cable ties, you may not reuse them. We
recommend you to prepare such articles, in advance.
This projector is compliant with RoHS. Therefore, it is recommended to use the articles compliant
to the original.
Item
Glass cloth tape (white)
Use cable ties W
Recommended material is as below;
Zytel 101, E. I. du Pont de Nemours & Company (Inc)
Leona 1300S, Asahi Kasei Chemicals Corporation
6-3 Before Replacing the LCD Prism Shift mech. assembly
assembly with a new one.
You should not replace separately the parts of the LCD Prism Shift mech. assembly. In case of a
failure in any parts of LCD Prism Shift mech. assembly, replace the whole unit.
Do not disassemble the unit because replacement of separate parts is not possible.
LWU720i/LHD720i/LWU620i Service Manual
LWU720i / LHD720i / LWU620i
ATTENTION
Product
NITTO tape no.5 (W=9mm)
NITTO tape no.5 (W=20mm)
NITTO tape no.188UL (W=15mm)
CAUTION
28