Connecting the power supply
Oxylog 2000 p us
The
is designed to operate on power supplies with
different voltages:
•
DC voltage from the on-board power supply:
Via DC/DC converter
°
With AC/DC power pack
°
•
With rechargeable battery (specified Smart Battery)
Internal supply with rechargeable battery
Installing the battery
1 Insert a fully charged battery into the battery compartment (A).
2 Attach the connector at the bottom.
3 Turn the cover upwards (B).
4 Tighten the screw (C).
Checking the charge of the battery
Press the button on the rechargeable battery.
The charge status is indicated as a percentage by LEDs.
Preparation
A
B
C
5