AXIOMTEK SBC8241 User Manual page 45

Checkpoint
Initialization before setting Video mode is complete.
28
Going for monochrome mode and color mode setting.
Different BUSes init (system, static, output devices) to start
2A if present. (Please see Reference for details of different
BUSes)
About to give control for any setup required before optional
2B
Video ROM check.
Processing before Video ROM control is done.
2C
About to look for optional Video ROM and give control.
Optional Video ROM control is done. About to give control to
2D
do any processing after Video ROM returns control.
Return from processing after the Video ROM control.
2E
If EGA/VGA not found then do display memory R/W test.
EGA/VGA not found.
2F
Display memory R/W test about to begin.
Display memory R/W test passed.
30
About to look for the retrace checking.
Display memory R/W test or retrace checking failed.
31
About to do alternate Display memory R/W test.
Alternate Display memory R/W test passed.
32
About to look for the alternate display retrace checking.
Video display checking over.
34
Display mode to be set next.
Display mode set.
37
Going to display the power on message.
Different BUSes init (input, IPL, general devices) to start if
38
present. (Please see Reference for details of different BUSes)
Display different BUSes initialization error messages. (Please see
39
Reference for details of different BUSes)
New cursor position read and saved.
3A
Going to display the Hit <DEL> message.
Hit <DEL> message displayed.
3B
Virtual mode memory test about to start.
40
Going to prepare the descriptor tables.
Descriptor tables prepared.
42
Going to enter in virtual mode for memory test.
Entered in the Virtual mode.
43
Going to enable interrupts for diagnostics mode.
AMI BIOS Fatal Error Codes
SBC8241 486 All-in-One Half-size User's Manual
Description
Continued . . . . .
8-