AXIOMTEK SBC8241 User Manual page 41


$  % 
5 ! 
7  
      

  
 
    & 6%6%$ 




+ 

  

  
 "
   
  
   
 "
    
 
 
 
Beeps Error Message
1 Refresh Failure
2 Parity Error
3 Base 64 KB Memory Failure
4 Timer Not Operational
Processor Error
5
8042 - Gate A20 Failure
6
Processor Exception Interrupt
7
Error
Display Memory Read/Write
8
Error
9 ROM Checksum Error
CMOS Shutdown Register
10
Read/Write Error
Cache Memory Bad — Do Not
11
Enable Cache
AMI BIOS Fatal Error Codes
SBC8241 486 All-in-One Half-size User's Manual
 !
The memory refresh circuitry is
faulty.
Parity error in the base memory (the
first 64 KB block) of memory.
Memory failure in first 64 KB.
A memory failure in the first 64 KB
of memory, or Timer 1 is not
functioning.
The CPU generated an error.
Cannot switch to protected mode.
The CPU on the CPU Card
generated an exception interrupt.
The system video adapter is either
missing or its memory is faulty. This
is not a fatal error.
The ROM checksum value does not
match the value encoded in
AMIBIOS.
The shutdown register for CMOS
RAM has failed.
The cache memory test failed.
Cache memory is disabled. Do not
press <Ctrl> <Alt> <Shift> <+> to
enable cache memory.
Description
88