Big Joe PDI Series Operation Maintenance Manual & Parts List page 51

16. Align the bolt holes in the bracket (28) and brake
pad (27), then slip the bolts (20) through the holes
in brake pad (27), mounting block (11) and
bracket (28) and hold the assembled parts
together.
17. Assemble the lock washers (31) and nuts (19) to
the bolts. (20).
18. Install the assembled brake (18) to mounting plate
with two screws (10) and lockwashers (9). Tap
R6110
PDI0404
https://forklift-manuals.jimdofree.com
assembly lightly with hammer, if necessary to
clear mounting plate opening.
19. Slide the link pin (17) into the lever (29) and
secure the link pin with the cotter pin (2).
20. Adjust the brake as described in paragraph
21. Install the service cover.
22. Remove the restrictions from the steering arm.
23. Reconnect battery connections.
Figure 6-3 Parts Replacement
6-1.
6-3