Checking The Drive For The Down­crop Auger; Adjusting Gatherer Points - Kemper 460 Operator's Manual

Maintenance
NOTE: Install cleaners (D) and (E) with their cutting
edges pointing in the direction of cut.
KM00321,000019D ­19­12JUN09­2/2
Checking the Drive for the Down­Crop Auger
The drive belt (A) for the down­crop auger is a
crossed­over V­belt. It is guided by an adjustable guide
roll (B). Belt tension is adjusted at the lower bearing of
the drive unit. The adjustment parameters are listed on
plate (C).
OUKM001,0000041 ­19­09MAR05­1/1

Adjusting Gatherer Points

In order to prevent plugging and crop losses, the gatherer
points (A) have to be properly adjusted. Therefore adjust
the gatherer point as close as possible to the gathering
drum.
The gatherer points can be adjusted in 2 different levels
using the slot holes.
A—Gatherer point
OUCC002,0002832 ­19­15OCT07­1/1
65­5 070909
PN=66