Kemper 460 Operator's Manual page 2

Foreword
READ THIS MANUAL carefully to learn how to operate
and service your machine correctly. Failure to do so
could result in personal injury or equipment damage.
This manual and the safety signs on your machine may
also be available in other languages (see your KEMPER
dealer to order).
THIS MANUAL SHOULD BE CONSIDERED a permanent
part of your machine and should remain with the machine
when you sell it.
MEASUREMENTS IN THIS MANUAL are given in metric
units. The customary U.S. unit equivalents are also
quoted. Use only correct replacement parts and fasteners.
Metric and inch fasteners may require a specific metric
or inch wrench.
RIGHT­HAND AND LEFT­HAND sides are determined
by facing in the direction the implement will travel when
going forward.
THE TERM "TRANSPORT" refers to a rotary harvesting
unit mounted on a forage harvester and transported from
A to B on the forage harvester.
THE TERM "HAULAGE" refers to a rotary harvesting unit
loaded on a flatbed carrier and transported from A to B
on the flatbed carrier.
WRITE PRODUCT IDENTIFICATION NUMBERS (P.I.N.)
in the Specification or Identification Numbers section.
Introduction
Please note all numbers exactly. In the event of theft,
these numbers may prove vital in tracing your property.
Your KEMPER dealer also needs these numbers when
you order parts. File the identification numbers in a secure
place off the engine or machine.
BEFORE DELIVERING THIS MACHINE, your dealer
performed a predelivery inspection.
THIS ROTARY HARVESTING UNIT IS DESIGNED
SOLELY for use in customary agricultural or similar
operations ("INTENDED USE"). Use in any other way
is considered as contrary to the intended use. The
manufacturer accepts no liability for damage or injury
resulting from this misuse, and these risks must be borne
solely by the user. Compliance with and strict adherence
to the conditions of operation, service and repair as
specified by the manufacturer also constitute essential
elements for the intended use.
THIS ROTARY HARVESTING UNIT SHOULD BE
operated, serviced and repaired only by persons familiar
with all its particular characteristics and acquainted
with the relevant safety rules (accident prevention).
The accident prevention regulations, all other generally
recognized regulations on safety and occupational
medicine and the road traffic regulations must be observed
at all times. Any arbitrary modifications carried out on this
rotary harvesting unit will relieve the manufacturer of all
liability for any resulting damage or injury.
KM00321,0000169 ­19­14MAY09­1/1
070909
PN=2