Kemper 460 Operator's Manual page 43

The rotary harvesting unit is powered via drive shafts
(A) and (B) on the left­hand side (seen in the direction
of travel).
A—Drive shaft
On the KEMPER rotary harvesting unit, 1st gear (A) and
2nd gear (B) are shifted directly at the drive case.
IMPORTANT: Drum speed must not exceed 33 rpm.
A—1. Gear
Operation of the Rotary Harvesting Unit
B—Drive shaft
B—2. Gear
45­5
KM00321,000018A ­19­08JUN09­2/3
KM00321,000018A ­19­08JUN09­3/3
070909
PN=43