3. First insert u.j. shaft into splined bushing (A) of rotary
harvesting unit drive on the forage harvester.
A—Splined bushing
4. Secure u.j. shaft with bushing (A) and lock nut (B).
A—Bushing
5. Put the other end of the u.j. shaft on the rotary
harvesting unit gear box (A).
A—Gear box
Installation on a CLAAS Forage Harvester
B—Lock nut
255
Continued on next page
KM00321,000017A 1908JUN093/7
KM00321,000017A 1908JUN094/7
KM00321,000017A 1908JUN095/7
070909
PN=28