Saving Configurations - Nortel Secure Router 3120 Installation Manual

64 CONFIGURATION
Command
Name
Saving Configurations
Execute the following command to save new configurations to Secure
Router 3120 memory.
SR> write memory
Execute the following command to save new configurations to a network
host. You must identify the host name or IP address, the host directory that
the file is being transferred to, and the new file name.
SR> save network 10.1.100.149 /maindir/config01.txt
Copyright © 2005-2007, Nortel Networks
.
Description
ls List the file names on the flash
rename
Rename a file on the flash
rm
Remove a file from the flash
show_boot Display Flash Bootrom Data
upload Upload a file to host
version List versions of the image files from the flash
Note: Before powering down the router, execute a save local
command to save the router configuration to the local flash.
Note: When saving to a network host, the host directory and file name
must already exist.
Secure Router 3120
Installation Guide
NN47260-300 02.01 Standard
9.2 10 January 2007
Nortel Networks Confidential