Technical Data - E+E Elektronik EE22 Series Manual

9.

TECHNICAL DATA

Measuring values of sensing probe
Relative Humidity
Sensor element 1)
Working range 1)
Accuracy 2) (including hysteresis, non-linearity and repeatability, traceable to international standards, administrated by NIST, PTB, BEV...)
Temperature dependence of electronics
Response time with metal grid filter
Temperature
Sensor element
Working range sensing probe
Accuracy (typ.)
Temperature dependence of electronics
Response time
Outputs
0...100% RH/ xx...yy°C
(temperature output scale according to
Txx ordering code)
Temperature dependence of
analogue outputs
General
Supply voltage SELV
for 0 - 1V output
for 0 - 5V output
for 0 - 10V output
for 4 - 20mA output
Load resistor for 4 - 20mA output
Current consumption
Electrical connection
Cable gland
Sensor protection
Material
Protection class of housing
Electromagnetic compatibility
Working temperature range of probe
Working temperature range of electronics
Storage temperature range
1) Refer to working range of humidity sensor HC105
2) The accuracy statement includes the uncertainty of the factory calibration with an enhancement factor k=2 (2-times standard deviation). The accuracy was calculated in
accordance with EA-4/02 and with regard to GUM (Guide to the Expression of Uncertainty in Measurement).
3) Refer to ordering guide
HC105
0...100% RH
-15...40°C
-15...40°C
-40...80°C
typ. ± 0.006% RH/°C
< 15s (at 20°C / t
Pt1000 (tolerance class A, DIN EN 60751)
fixed sensing probe: -40...60°C
remote sensing probe: -40...80°C
Δ°C
typ. ± 0.007°C/°C
with combined RH/T probe:
with seperated RH and T probes:
3)
0 - 1V
0 - 5V / 0 - 10V
4 - 20mA (two wire)
max. 0.2
10 - 35V DC
12 - 35V DC
15 - 35V DC
10 - 35V DC
R <
L
typ. 10mA for DC supply
screw terminals max. 2.5mm
M16x1.5
(optional connector; type: Lumberg, RSF 50/11)
membrane filter, PTFE filter, metal grid filter (polycarbonate),
metal grid filter (stainless steel)
housing: PC or Al Si 9 Cu 3
IP65; Nema 4
EN 61000-6-3
EN 61000-6-2
-40...60°C
-40...60°C
-40...60°C
<90% RH
(5...104°F)
>90% RH
(5...104°F)
(-40...176°F)
)
90
(-40...140°F)
-0.5mA < I
-1mA < I
R < 500 Ohm
L
μA
mV
resp. 1
°C
°C
or 9 - 29V AC
or 15 - 29V AC
or 15 - 29V AC
U - 10V
[Ω]
v
0.02 A
2
cable Ø 4.5 - 10 mm
FCC Part15 ClassB
ICES-003 ClassB
/ 80°C
(-40...140°F) (176°F)
(-40...140°F)
(-40...140°F)
19
± (1.5 + 0.5%*mv) % RH
± 2.5% RH
± (1.7 + 1.5%*mv) % RH
(-40...176°F)
°C
t : typ. < 3min
63
t : typ. < 6min
63
< 0.5mA
L
< 1mA
L
SELV = Safety Extra Low Voltage
typ. 20mA for AC supply
eff
(0.18 - 0.39")
probe: PC or stainless steel
for remote sensing probe