Heat & Glo SL-3X-IFT Installation Manual page 29

Rear Vent - Horizontal Termination
No Elbow
Note: Use DVP Series
components only.
Figure 4.19
Two 90º Elbows
Note: Use DVP Series
components only.
Figure 4.20
Heat & Glo • SL-3X-IFT, SL-5X-IFT, SL-7X-IFT, SL-9X-IFT Installation Manual • 2472-980 Rev. Q • 3/20
ALL MODELS
H = 24 in. (610 mm) Maximum
1
H
1
Must use two 90º elbows for corner installations. The use of
two 90º elbows in a corner installation will affect space re-
quirements. See Section 3.B. Use of 45º elbow not allowed.
90-DEGREE
ELBOWS
29