Advertisement
Hardware Installation
To achieve optimal performance, Cat6 cable is
recommended.
1.
Power off all devices including your HDMI source
and HDMI display.
2.
Connect your HDMI source to the Transmitter's
HDMI In connector.
3.
Connect your HDMI display to the Transmitter's
HDMI Out. This connection is optional and need
only when local monitoring of the local display is
required.
4.
Optional: Connect the IR Blaster Extension Cable
to the Transmitter's IR Out port. Face the eye
towards your HDMI source device's IR window.
This connection is needed only if you need to
control your HDMI source at the remote location.
5.
Plug your Cat5e/6 cable between the Transmitter's
RJ45 Out and Receiver's RJ45 In.
6.
Connect your HDMI display to the Receiver's
HDMI Output connector with an HDMI cable
(HDMI cable not included).
7.
Optional: Connect the IR Receiver Extension Cable
to the Receiver's IR In port. This connection is
needed only if you need to control your HDMI
source at the remote location.
8.
Plug the included 12V power adapter into the
Transmitter's Power Jack.
9.
Plug the included 5V power adapter into the
Receiver's Power Jack, then plug all power
adapters into reliable power outlets.
10. Power on your HDMI source device and HDMI
displays. The extender is ready for use.
7
Advertisement
