Advertisement
7
Link LED: Turns red when powered. Turns blue
when there is an HDMI signal detected
8
Reset: Press to reset if HDMI Extender doesn't work
properly
1
Reset: Press to reset if HDMI Extender doesn't work
properly
2
RJ45 In: Link to the Transmitter's RJ45 Out via a
Cat5e/6 cable
3
Link LED: Blinks when powered on. On when the
Cat cable is connected/linked properly between
the Transmitter and receiver
Figure 2: Transmitter (TX) Front Panel
Figure 3: Receiver (RX) - Input
5
Advertisement
