Advertisement
Product Layout
1
Power Jack: Connect the included 12VDC/2A power
adapter here
2
EDID: The HDMI source device reads EDID
information from the TX unit, and outputs it to the
RXs. Please refer to the setting below.
IR Out: Infrared 3.5mm socket. Plug IR Blaster
3
Extension Cable here. See instruction on page 7.
HDMI In: Connect your HDMI source here with an
4
HDMI cable (cable not included)
HDMI Out: Connect your HDMI display here for
5
local monitoring of the HDMI displays
RJ45 Out: Link to Receiver's RJ45 In using a Cat5e/
6
6 cable
4
Figure 1: Transmitter (TX) - Back Panel
*Default setting
Advertisement
