Equipment - ESAB A2 S GMAW Mini Master Instruction Manual

GB
3.4

Equipment

The complete welding head consists of a motor for the feed of the wire and contact
equipment supplying current to the wire.
Example of an A2 SGF1 with hand operated linear slides:
1. Wire feed unit with
four--wheel drive
2. Contact equipment containing
gas nozzle, contact device and
water hose
3. Angle slide
4. Linear slide (hand operated)
5. Wire feed motor
6. Wire drum
7. Wire conduit
8. Rotary attachment
Example of an A2 SGF1 with motor driven linear slides:
1. Wire feed unit with
four--wheel drive
2. Contact equipment containing
gas nozzle, contact device and
water hose
3. Angle slide
4. Linear slide (motor driven)
5. Wire feed motor
6. Wire drum
7. Wire conduit
8. Rotary attachment
Connection instructions for MIG/MAG welding, see the system diagram on page 69.
fha8d1ea
- - 67 - -