Introduction; Equipment - ESAB ET 17 Instruction Manual

GB
CAUTION
Read and understand the instruction manual before
installing or operating.
CAUTION
Class A equipment is not intended for use in residential locations where
the electrical power is provided by the public low-voltage supply system.
There may be potential difficulties in ensuring electromagnetic
compatibility of class A equipment in those locations, due to conducted
as well as radiated disturbances.
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
ESAB can provide you with all necessary welding protection and accessories.
9

INTRODUCTION

TIG torch ET 17, ET 17V is intended for manual TIG welding and is
air cooled.
ESAB's accessories for the product can be found on page 157.
9.1

Equipment

TIG torch ET 17, ET 17V is supplied with an electrode Ø 2,4 mm, wear parts and an
instruction manual.
bg20e1
Voltage max. 15 kV.
- 33 -
© ESAB AB2011