Equipment - ESAB A6 S Arc Master Instruction Manual

GB
MIG/MAG welding
For MIG/MAG welding the A6 SG welding head is always used, permitting a max.
load of 600 A. The welding head is water--cooled, with the cooling water supplied by
hoses from connections intended for the purpose.
3.5

Equipment

Included in a complete welding head are a feed motor (A6 VEC) to feed in the wire
and contact equipment which supplies current to the wire and provides a good con-
tact.
Contact equipment is available in several different versions.
A6 SF is used for submerged--arc welding.
S
A6 SG is used for MIG/MAG welding.
S
Example - - A6 SFE1 and A6 SFE2
1 Straightener.
2 Contact equipment which consists of a
contact tip, connector and flux tube.
3 Angular slide
4 Slide (motor--driven or manually operated)
5 Motor and gearbox (A6 VEC)
6 Wire drum
7 Flux hopper (may be fitted with a cyclone)
Example - - A6 SGE1
1 Straightener.
2 Contact equipment which consists of a
connector, gas nozzle and water hoses.
3 Angular slide.
4 Slide (motor--driven or manually operated)
5 Motor and gearbox (A6 VEC).
6 Wire drum.
7 Fine--wire straightener (Accessories).
8 Wire guide.
ffa9d1ea
- - 67 - -