Symbols - Fluke ScopeMeter 190 II Series Service Manual

Fluke-062, -102, -104, -202, -204, -502, -504
Service Manual

Symbols

Table 1 is a list of symbols that are used on the Test Tool, in the Users Manual,
in this Service Information, or on spare parts for this Test Tool.
Symbol

Risk of Danger. Important information. See manual.

Hazardous voltage

Live Voltage

Earth Ground

DC (Direct Current)

AC or DC (Alternating or Direct Current)

Conforms to relevant Australian EMC standards.
Conforms to relevant North American Safety Standards.

Conforms to European Union directives.


Conforms to relevant South Korean EMC Standards.
Double Insulation

Measurement Category III is applicable to test and measuring circuits connected to the

distribution part of the building's low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the

source of the building's low-voltage MAINS installation.
This product contains a Lithium-ion battery. Do not mix with the solid waste stream. Spent

batteries should be disposed of by a qualified recycler or hazardous materials handler per
local regulations. Contact your authorized Fluke Service Center for recycling information.
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the equipment types in the WEEE

Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted municipal waste. Go to
Fluke's website for recycling information.
1-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 1-1. Symbols
Description