Table of Contents
Advertisement
•
Connect the common test lead before the live test lead and
remove the live test lead before the common test lead.
Remove the input signals before you clean the Product.
•
•
Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
For safe operation and maintenance of the Product:
•
Remove batteries to prevent battery leakage and damage
to the Product if it is not used for an extended period.
•
Repair the Product before use if the battery leaks.
•
Be sure that the battery polarity is correct to prevent
battery leakage.
•
Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs, clean
with water and get medical aid.
Symbols
The symbols in Table 1 are used on the Product or in this manual.
Symbol
Risk of Danger. Important information. See Manual.
Hazardous voltage
Double insulation
Battery
Earth ground
Conforms to relevant South Korean EMC standards.
Measurement Category III is applicable to test and measuring circuits connected to the
CAT III
distribution part of the building's low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the
CAT IV
source of the building's low-voltage MAINS installation.
Conforms to European Union directives.
Conforms to relevant North American Safety Standards.
Conforms to relevant Australian EMC requirements.
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/electronic product in
domestic household waste. Product Category: With reference to the equipment types in the
WEEE Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted municipal waste. Go
to Fluke's website for recycling information.
Table 1. Symbols
Meaning
Wireless DC Voltage
Symbols
3
Advertisement
Table of Contents
