Newport ESP302 Startup Manual page 29

ESP302 Controller
Setting HOST dynamic IP address through the website
• Connect to REMOTE plug of the ESP302 as described in section 3.7.1: "Direct
Connection to the ESP302 Controller".
• Connect the Ethernet cable to the HOST connector of the ESP302 controller and to
your network.
• Get to Controller → IP management web page
• Select dynamic IP as shown below:
• Click the "SAVE CONFIGURATION" button and the following screen appears:
• Click "OK" and reboot the controller by clicking REBOOT.
A pop-up window appears showing "REBOOT IN PROGRESS". When the boot
sequence is complete, the user is redirected to the login page. The time to reboot is
about 50 seconds.
21
Start-Up Manual
A1270B1 - EDH0411En1021 – 02/20