Yamaha TRACER MT09TRA Service Manual page 396

9. Check the gear position switch.
Refer to "CHECKING THE GEAR
POSITION SWITCH" on page
8-147.
OK
10.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-127.
OK
11.Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-137.
OK
12.Check the lean angle sensor.
Refer to "CHECKING THE LEAN
ANGLE SENSOR" on page 8-139.
OK
13.Check the entire ignition system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
OK
Replace the ECU.
Refer to "REPLACING THE ECU (en-
gine control unit)" on page 8-132.
Replace the gear position switch.
NG
Replace the sidestand switch.
NG
Replace the relay unit.
NG
Replace the lean angle sensor.
NG
Properly connect or repair the ignition sys-
tem's wiring.
NG
8-5
IGNITION SYSTEM