Yamaha TRACER MT09TRA Service Manual page 279

7. Tighten:
• Engine mounting adjust bolt (rear) "2"
TIP
• Tighten the engine mounting adjust bolts to
specification with the pivot shaft wrench and
pivot shaft wrench adapter.
• Make sure that the flange on the engine
mounting adjust bolt contacts the engine.
Engine mounting adjust bolt
(rear)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Pivot shaft wrench
90890-01518
Frame spanner socket
YM-01518
Pivot shaft wrench adapter
90890-01476
8. Install:
• Centerstand bracket bolt (right) "9"
(temporarily tighten)
9. Install:
• Engine mounting bolt (right front upper side)
"10"
10.Tighten:
• Engine mounting nut (rear lower side) "11"
• Engine mounting nut (rear upper side) "12"
Engine mounting nut (rear lower
side)
45 Nm (4.5 m·kgf, 33 ft·lbf)
Engine mounting nut (rear upper
side)
45 Nm (4.5 m·kgf, 33 ft·lbf)
11.Tighten:
• Engine mounting bolt (right front upper side)
"10"
• Engine mounting bolt (left front upper side)
"6"
• Engine mounting bolt (left front lower side) "7"
• Engine mounting bolt (right front lower side)
"8"
Engine mounting bolt (front up-
per and front lower side)
45 Nm (4.5 m·kgf, 33 ft·lbf)
12.Tighten:
• Centerstand bracket bolt (left) "5"
• Centerstand bracket bolt (right) "9"
Centerstand bracket bolt
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
2
10
12
9
8 2
11
5-8
ENGINE REMOVAL
1
6
7
3
5
4