Removing The Clutch - Yamaha TRACER MT09TRA Service Manual

EAS30346

REMOVING THE CLUTCH

1. Remove:
• Cover "1"
• Clutch cover "2"
• Gasket
TIP
Loosen each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
1
2. Remove:
• Oil pump driven sprocket "1"
Refer to "OIL PUMP" on page 5-50.
3. Remove:
• Compression spring bolts "1"
• Compression springs
• Pressure plate "2"
• Pull rod "3"
1
3
4. Remove:
• Friction plates 1 "1"
2
1
2
1
5-42
5. Remove:
• Clutch plates "1"
• Friction plates 2
6. Straighten the clutch boss nut rib "a".
a
7. Loosen:
• Clutch boss nut "1"
TIP
While holding the clutch boss "2" with the univer-
sal clutch holder "3", loosen the clutch boss nut.
Universal clutch holder
90890-04086
Universal clutch holder
YM-91042
CLUTCH
1
1