Toro Reelmaster 5100-D Service Manual page 268

8. Apply clean multi-purpose grease to the face of the
upper cover plate, input shaft and face seal (Fig. 70).
9. Assemble the seal back-up ring and face seal onto
the seal spacer (Fig. 71).
10. Install the face seal, back-up ring and spacer assem­
bly over the end of the input shaft and onto the upper
cover plate (Fig. 72).
Repairs Page 7 - 38
Figure 70
Figure 71
Figure 72
®
Reelmaster 223-D/5100-D/5300-D