Front Reels Turn Too Fast
Cause
__
________________________________________________________________________________________
VS1 not operating properly.
Front Reels Turn in Only One Direction
Cause
__
________________________________________________________________________________________
S8 not shifting.
Front Reels Stop or Won't Start – During Backlap Only
Cause
__
________________________________________________________________________________________
Motors bypassing.
_____________________________________________ ________________ ______ ________________ ______ ________________ ___________________________________
Load too high for motor.
Troubleshooting
__
__
__
Page 4 - 20
Correction
Do electrical diagnostics to make sure that voltage
is being applied to VS1 and that there is no electri
cal fault. See Chapter 5 - Electrical System.
Do cartridge service procedure for VS1.
Interchange VS1 with VS2 and check operation. Re
place VS1 if faulty.
Correction
Do electrical diagnostics to make sure that voltage
is being applied to S8 and that there is no electrical
fault. See Chapter 5 - Electrical System.
Do cartridge valve service procedure for valve S8.
Interchange S8 with S9 and check operation. Re
place S8 if faulty.
Correction
Increase flow to motors by adjusting HOC selector
knob.
__
__
Decrease load
__
®
Reelmaster
5100-D