lancer UNICORN TOWER Installation Manual

lancer UNICORN TOWER Installation Manual

Hide thumbs Also See for UNICORN TOWER:

Advertisement

Quick Links

FOR QUALIFIED INSTALLER ONLY. This basic Installation Sheet is an initial release. If a complete Operations
Manual (for the unit being installed) is required or needed, please refer to the Lancer Corp website (lancercorp.
com) or for your convenience, scan this QR code with a mobile device (app required) for immediate access to other
Technical Documents and alternative translations (if available) pertaining to this unit. Contact Lancer Customer
Service for any assistance.
ABOUT THIS MANUAL
This booklet is an integral and essential part of the product and
should be handed over to the operator after the installation and
preserved for any further consultation that may be necessary.
Please read carefully the guidelines and warnings contained
herein as they are intended to provide the user with essential
information for the continued safe use and maintenance of the
product. In addition, it provides GUIDANCE ONLY to the user on
the correct services and site location of the unit.
The installation and relocation, if necessary, of this product must be carried out by qualified personnel with
up-to-date safety and hygiene knowledge and practical experience, in accordance with current regulations.
IMPORTANT SAFETY INSTRUCTIONS
! Intended Use
The dispenser is for indoor use only. This appliance is to be installed in a location where its use can be overseen by trained
personnel. This unit is not a toy. Children should be supervised not to play with appliance. It should not be used by children or
infirm persons without supervision. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Cleaning and user maintenance shall not be performed by
children without supervision. The min/max ambient operating temperature for the dispenser is 4°C to 41°C (40°F to 105°F). Do not
operate unit below minimum ambient operation conditions. Should freezing occur, cease operation of the unit and contact
authorized service technician. Service, cleaning and sanitizing should be accomplished only by trained personnel. Applicable safety
precautions must be observed. Instruction warnings on the product being used must be followed.
310
BEFORE GETTING STARTED
Each unit is tested under operating conditions and is thoroughly
inspected before shipment. At the time of shipment, the carrier
accepts responsibility for the unit. Upon receiving the unit,
carefully inspect the carton for visible damage. If damage exists,
have the carrier note the damage on the freight bill and file a
claim with carrier. Responsibility for damage to the dispenser lies
with the carrier.
UNICORN TOWER
LANCER INSTALLATION GUIDE
LANCER PN: 28-0827/04

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UNICORN TOWER and is the answer not in the manual?

Questions and answers

Summary of Contents for lancer UNICORN TOWER

  • Page 1 FOR QUALIFIED INSTALLER ONLY. This basic Installation Sheet is an initial release. If a complete Operations Manual (for the unit being installed) is required or needed, please refer to the Lancer Corp website (lancercorp. com) or for your convenience, scan this QR code with a mobile device (app required) for immediate access to other Technical Documents and alternative translations (if available) pertaining to this unit.
  • Page 2: Specifications

    F Electrical Warning Appliance must be supplied by 24 VDC. Check dispenser name plate label, located inside tower panels, for the correct electrical requirements of unit. Do not plug into a wall electrical outlet unless the current shown on the name plate label agrees with local cur- rent available.
  • Page 3: Installation

    This manual was developed by the Lancer Corporation as a reference for the owner/operator and installer of this dispenser. Please read this guide before installation and operation of this dispenser. If service is required please call your Lancer Service Agent or Lancer Customer Service.
  • Page 4: Junction Box Installation

    Route ribbon cable, harness, and syrup/water lines through the the tower connection nut provided, then thread the nut onto the tower and tighten to secure to counter. ! ATTENTION Do not over tighten, this can cause damage to the ceramic lever. A.
  • Page 5 Remove nozzle by twisting counterclockwise and pulling Install filter to water line to avoid equipment damage. down. NOTE Install Lancer syrup separator (PN 05-2919) in place of nozzle. Use a filter of at least 100 mesh [100 strands per 25mm (one inch)] screen and installed immediately upstream Close syrup shut-off at mounting block for syrup brands of all check valve type backflow preventers used for water supply protection.
  • Page 6: Volumetric Valve Adjustment

    Using a Lancer ratio cup verify water flow rate (14 oz. in 8 Select the valve to program by adjusting the toggle on the sec.). Use a screwdriver to adjust if needed. Selector Board. Press [red mem] to read the valve ratio setting in memory.
  • Page 7: Cleaning And Sanitizing

    CLEANING AND SANITIZING General Information • Lancer equipment (new or reconditioned) is shipped from the factory cleaned and sanitized in accordance with NSF Daily Cleaning guidelines. The operator of the equipment must provide continuous maintenance as required by this manual and/or...
  • Page 8: Cleaning And Sanitizing Product Lines

    Grasp the Chrome Disks located on the right and left side 11. Remove the cup rest then wipe clean using the cleaning of the dispenser head and rotate, slowly, in a counter- solution. clockwise movement until a square notch is visible on both 12.
  • Page 9 WIRING DIAGRAM - LFCV...
  • Page 10 WIRING DIAGRAM - VV...
  • Page 11 COUNTER CUTOUT - NOT TO SCALE...
  • Page 12 Lancer Corp. 800-729-1500 Technical Support/Warranty: 800-729-1550 custserv@lancercorp.com lancercorp.com...

Table of Contents