Nice O-Box Operation Instructions And Warnings page 11

3.4 – RECEIVERS SECTION
To access this area, first connect a receiver to O-box and proceed as follows.
01. On the home page click on the icon "Receivers" (fig. 3).
02. A main window is displayed for entry to the Receivers section (fig. 7): select
the family and model of the receiver to be programmed (the system checks
whether there are receivers of this family connected to O-Box and automat-
ically displays the model. However, the model can be selected manually).
Then on the browser bar, click on "next" to go to the next window.
Note – If programming a receiver in the series "NiceOpera" select the type
of connection used: wireless (in this case the receiver certificate must be
entered) or connector on O-Box (in this case use the SM connector).
03. After selecting the receiver family, a second window is displayed, entitled
"What do you want to do?", requesting which operations to be per-
formed (fig. 8):
• Configure a new receiver (this operation enables configuration of a new
receiver).
• Read and modify the data of a receiver (this operation enables reading
and modification of the data of a receiver, saving each time the modifica-
tions applied).
• Cancel all data of a receiver (this operation completely formats the data
of a receiver).
• Search and modify codes in the memory (operation present only for
receivers of the family "NiceOne". The operation enables direct operations
on the receiver memory).
04. A third window is then displayed for programming (fig. 9). In this window,
in the Functions menu select the required item and work in the operative
area for modifying and adding parameters as required.
The functions menu is divided into the three following sections: Codes in
memory; Settings; Import / Export.
–– CODES IN MEMORY ––
In this section the user can modify codes stored in the memory of all types of
receiver. To do this, click on the function "Modify Codes" to access the follow-
ing options:
7
8
English – 9