Advertisement
The CORE accessory is a device that – connected to a Wi-Fi network – allows for controlling:
Before proceeding with the product's installation, make sure that:
With the power cable: use the power cable (2) supplied with the accessory and insert it into the USB port (3).
Batteries – 2 x AA rechargeable NiMh (not included). Replace the batteries (4) only when the power status LED (7) flashes red, by removing the battery compartment lid (5) with the aid of a screwdriver.
when connecting the power cable or inserting the battery, verify that the power status LED (7) remains lit green while the Wi-Fi status LED (8) flashes green, meaning that the CORE accessory is correctly powered and ready for being inserted in the domestic network and paired.
Note: the flashing green Wi-Fi LED means that the Wi-Fi interface is awaiting to be configured.
Only if it is battery-powered and not powered externally can CORE be switched off and on again. To switch the device off, press the RESET button (6) briefly twice in quick succession. To switch the device on, simply press the RESET button (6) briefly.
After powering up the CORE accessory correctly, a Wi-Fi network will be automatically created with which to pair CORE with other Nice devices. Proceed as described in the instructions of the MyNiceWelcome App. When the CORE accessory is paired, the power status LED (7) and the Wi-Fi status LED (8) are lit green.
In the event of malfunctions, the LEDs can light up or start flashing. If this happens, contact the Technical Assistance Service.
Power status LED (7) lit red: battery or system anomaly.
Wi-Fi status LED (8) lit red: Wi-Fi module anomaly.
Wi-Fi status LED (8) flashing red: no connection to the configured network (AP not available or incorrect password).
Radio status LED (9) lit red: internal radio module anomaly
If the Wi-Fi network router must be replaced or its password modified, the settings relative to the Wi-Fi network can be reset without having to reset the user settings. To do this, press and hold the RESET button (6) for at least 3 seconds: the Wi-Fi status LED (8) will start flashing red. At this point, release the RESET button (6). The CORE device will restart in the Wi-Fi configuration mode (with Wi-Fi status LED flashing green), retaining all the other settings.
The CORE device can be completely reset to delete all the settings (users, scenarios, devices and Wi-Fi). To do this, press and hold the RESET button (6) for at least 10 seconds: all the LEDs will flash red. At this point, release the RESET button (6). The CORE device will restart.
Power the CORE device with the RESET button (6) pressed. The radio status LED (9) will flash red. Press and hold the RESET button (6) for at least 10 seconds. The radio status LED (9) will stop flashing.
Release the button.
The above characteristics refer to an ambient temperature of 20°C (± 5°C) and to normal use of the device in a residential setting.
* RF interferences and the position of the devices in buildings can reduce the radio range.
Opening of the devices, with the exception of the battery compartment, implies the immediate voiding of the industrial warranty.
Nice S.p. A. declines all liability for damages resulting from improper use of the product, other than as specified in this manual.
In order to improve its products, Nice S.p. A. reserves the right to modify their technical specifications at any time without prior notice, without however altering their functions or intended use.
The battery must be disposed of in the appropriate bins according to current regulations; when scrapping the device, the battery must be removed beforehand.
Hereby, NICE S.p. A., declares that the radio equipment type
- CORE
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.niceforyou.com/en/support
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Core that isn't answered in the manual? Leave your question here.